stW14NB50 n-channel 500v - 0.40 w - 14a - to-247 powermesh ? mosfet preliminary data n typical r ds(on) = 0.40 w n extremely high dv/dt capability n 100% avalanche tested n gate charge minimized using the latest high voltage mesh overlay ? process, stmicroelectronics has designed an advanced family of power mosfets with outstanding performances. the new patent pending strip layout coupled with the companys proprietary edge termination structure, gives the lowest r ds(on) per area, exceptional avalanche and dv/dt capabilities and unrivalled gate charge and switching characteristics. applications n switch mode power supplies (smps) n dc-ac converters for welding equipment and uninterruptible power supplies and motor drive this is preliminary information on a new product now in development or undergoing evaluation. details are subject to change wit hout notice. ? internal schematic diagram absolute maximum ratings symbol parameter value unit v ds drain-source voltage (v gs = 0)at t c = 100 o c 500 v v dgr drain- gate voltage (r gs = 20 k w )at t c = 100 o c 500 v v gs gate-source voltage 30 v i d drain current (continuous) at t c = 25 o c14a i d drain current (continuous) at t c = 100 o c8a i dm ( ) drain current (pulsed) 52 a p tot total dissipation at t c = 25 o c 190 w derating factor 1.51 w/ o c dv/dt( 1 ) peak diode recovery voltage slope 4 v/ns t stg storage temperature -65 to 150 o c t j max. operating junction temperature 150 o c ( ) pulse width limited by safe operating area ( 1 ) i sd 14 a, di/dt 200 a/ m s, v dd v (br)dss , tj t jmax april 1999 type v dss r ds(on) i d stW14NB50 500 v < 0.45 w 14 a 1 2 3 to-247 1/5
thermal data r thj-case rthj-amb r thc-sink t l thermal resistance junction-case max thermal resistance junction-ambient max thermal resistance case-sink typ maximum lead temperature for soldering purpose 0.66 62.5 0.5 300 o c/w oc/w o c/w o c avalanche characteristics symbol parameter max value unit i ar avalanche current, repetitive or not-repetitive (pulse width limited by t j max) 14 a e as single pulse avalanche energy (starting t j = 25 o c, i d = i ar , v dd = 50 v) 900 mj electrical characteristics (t case = 25 o c unless otherwise specified) off symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage i d = 250 m a v gs = 0 500 v i dss zero gate voltage drain current (v gs = 0) v ds = max rating v ds = max rating t c = 125 o c 1 50 m a m a i gss gate-body leakage current (v ds = 0) v gs = 30 v 100 na on ( * ) symbol parameter test conditions min. typ. max. unit v gs(th) gate threshold voltage v ds = v gs i d = 250 m a 345v r ds(on) static drain-source on resistance v gs = 10v i d =6.5 a 0.4 0.45 w i d(on) on state drain current v ds > i d(on) x r ds(on)max v gs = 10 v 14 a dynamic symbol parameter test conditions min. typ. max. unit g fs ( * ) forward transconductance v ds > i d(on) x r ds(on)max i d =6.5 a 9 s c iss c oss c rss input capacitance output capacitance reverse transfer capacitance v ds = 25 v f = 1 mhz v gs = 0 2100 300 30 pf pf pf stW14NB50 2/5
electrical characteristics (continued) switching on symbol parameter test conditions min. typ. max. unit t d(on) t r turn-on delay time rise time v dd = 250 v i d = 6 a r g = 4.7 w v gs = 10 v 24 12 ns ns q g q gs q gd total gate charge gate-source charge gate-drain charge v dd = 400 v i d =13 a v gs = 10 v 50 14 21 68 nc nc nc switching off symbol parameter test conditions min. typ. max. unit t r(voff) t f t c off-voltage rise time fall time cross-over time v dd = 400 v i d = 13 a r g = 4.7 w v gs = 10 v 20 15 33 ns ns ns source drain diode symbol parameter test conditions min. typ. max. unit i sd i sdm ( ) source-drain current source-drain current (pulsed) 13 52 a a v sd ( * ) forward on voltage i sd = 14 a v gs = 0 1.6 v t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd = 13 a di/dt = 100 a/ m s v dd = 100 v t j = 150 o c 525 5.5 21 ns m c a ( * ) pulsed: pulse duration = 300 m s, duty cycle 1.5 % ( ) pulse width limited by safe operating area stW14NB50 3/5
dim. mm inch min. typ. max. min. typ. max. a 4.7 5.3 0.185 0.209 d 2.2 2.6 0.087 0.102 e 0.4 0.8 0.016 0.031 f 1 1.4 0.039 0.055 f3 2 2.4 0.079 0.094 f4 3 3.4 0.118 0.134 g 10.9 0.429 h 15.3 15.9 0.602 0.626 l 19.7 20.3 0.776 0.779 l3 14.2 14.8 0.559 0.413 0.582 l4 34.6 1.362 l5 5.5 0.217 m 2 3 0.079 0.118 dia 3.55 3.65 0.140 0.144 p025p to-247 mechanical data stW14NB50 4/5
information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the co nsequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specification mentioned in this pu blication are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectron ics products are not authorized for use as critical components in life support devices or systems without express written approval of stmicr oelectronics. the st logo is a trademark of stmicroelectronics ? 1999 stmicroelectronics C printed in italy C all rights reserved stmicroelectronics group of companies australia - brazil - canada - china - france - germany - italy - japan - korea - malaysia - malta - mexico - morocco - the neth erlands - singapore - spain - sweden - switzerland - taiwan - thailand - united kingdom - u.s.a. http://www.st.com . stW14NB50 5/5
|
